TILE ROOFING / PHOENIX METRO

The underlayment
decides how long
a tile roof lasts.

On a tile roof, the tile sheds most of the water and the underlayment beneath it catches what gets past. Knowing which one has the problem changes the entire conversation.

Book a free inspection

A USEFUL FIRST QUESTION

“Is this a tile problem, or an underlayment problem?”

01 / THE CUSTOMER PROBLEM

Intact tile.
Water inside
anyway.

A tile roof can look sound from the street while the weather-resisting layer underneath it is the part that needs attention. Proposals that do not distinguish between the two are difficult to evaluate.

02 / WHAT THE WORK COVERS

Ask for the
scope in writing.

A tile scope should be explicit about which layer is being worked on and what happens to the tile itself:

  • Which layer the proposed work addresses: tile, underlayment, flashings, or a combination
  • Whether existing tile is removed and reinstalled, or replaced
  • How tile breakage during removal and reinstallation is handled and priced
  • Whether replacement tile is available to match the existing profile and color
  • Treatment of flashings, valleys, and penetrations beneath the tile
  • What proportion of the roof area the work covers

03 / SUITABILITY AND LIMITS

Where this fits.
Where it does not.

Generally a fit for

  • Tile in serviceable condition over an underlayment that needs attention
  • Leaks appearing without obvious surface damage
  • Properties where matching the existing roof appearance matters
  • Owners weighing an underlayment scope against a full system change

Ask harder questions when

  • Tile that is extensively cracked, delaminated, or no longer available to match
  • Structural concerns, which are a separate professional assessment
  • Cases where nobody has looked beneath the tile at all
  • Any proposal that treats a tile roof as a single undifferentiated surface

04 / INSPECTION CONSIDERATIONS

What an assessment
should look at.

01

Separate the layers.

Ask which layer was examined and how. A surface-only look does not describe the condition of what is underneath.

02

Look at the details beneath.

Valleys, flashings, and penetrations under the tile are common leak sources and are not visible from above.

03

Account for the tile inventory.

If tile is to be lifted and reused, ask about expected breakage, matching stock, and what happens if replacements cannot be sourced.

04

Ask about access damage.

Walking a tile roof can break tile. Ask how the roof was accessed and how access damage is handled.

05 / OPTIONS TO COMPARE

More than one
reasonable answer.

01 Underlayment work, existing tile reinstated

Tile is removed, the layer beneath is addressed, and the tile is reinstalled. Used where the tile is serviceable but the underlayment is not.

Ask about breakage rates, matching stock for replacements, and which flashings are included.

02 Localized tile and detail repair

Addresses a defined area or a specific detail rather than the whole roof.

Ask what evidence limits the problem to that area, and what condition the rest of the roof is in.

03 Full tile system replacement

Replaces tile and the layers beneath it as one assembly.

Ask why the existing tile is not being retained, and what the new specification is in full.

04 Change to a different system

Moves away from tile entirely. A structural and appearance decision as much as a roofing one.

Ask what drives the recommendation, and what it changes about weight, maintenance, and the look of the property.

06 / COST DRIVERS

Why two proposals
are not the
same number.

Tile figures move for reasons that are specific to the system. These are the ones worth asking about.

01

Tile handling.

Removing, stacking, protecting, and reinstalling tile is labor that a surface-only comparison misses.

02

Breakage and matching.

Expected breakage, the cost of replacement tile, and whether a match is available at all.

03

Area covered.

Whether the work covers the whole roof, one slope, or a defined section.

04

Detail work beneath.

Flashings, valleys, and penetrations addressed while the tile is off.

07 / QUESTIONS

Before you
decide.

My tile looks fine. Why am I being told I need work?

Tile and the layer beneath it do not necessarily reach the end of their service lives together. Ask which layer the assessment found a problem with, what evidence supports that finding, and what was observed beneath the tile.

Can my existing tile be reused?

Often it can, if it is in serviceable condition, but expect some breakage during removal and reinstallation. Ask what breakage is anticipated, how replacements will be sourced, and what happens if a match is unavailable.

How long does tile last compared with the underlayment?

Tile usually outlasts the underlayment beneath it, and the underlayment is what decides when the roof needs work. Our guide to how long roofs last in Arizona covers both. Ask for the basis of any lifespan a contractor quotes you.

Is walking on my tile roof a problem?

It can break tile, which is one reason to avoid going up yourself. Ask any contractor how they access the roof and how access damage is handled.

Can you work on my tile roof?

Yes, from one slipped tile to a full re-roof. Call and describe the property and what you have noticed, and we will tell you what the work would involve.

SOURCES

Where the
facts come from.

  1. Ask a TRI Alliance Expert: Underlayment (Rick Olson, Tile Roofing Institute, now the Tile Roofing Industry Alliance)Eagle Roofing Products. The tiles outlast the house; the underlayment beneath them decides the life of the roof.
  2. Concrete and Clay Roof Tile Installation Manual (March 2024)Tile Roofing Industry Alliance. A tile roof is a water-shedding assembly, and the underlayment is critical because of water getting through faulty flashing and wind-driven rain.
  3. Technical Brief 2021-02: Tile replacement considerations for tile roofsTile Roofing Industry Alliance. Most tile is still in production, but some profiles are no longer made.

Sources checked October 9 to 15, 2026.

The tile looks fine. Is the rest?

A free inspection looks beneath the tile wherever it can be seen, and puts what it finds in writing with photographs.

CallFree inspection